visual.txt - html version
visual.txt - html version
*visual.txt* For Vim version 5.3. Last modification: 1998 Aug 17
VIM REFERENCE MANUAL by Bram Moolenaar
Visual mode *Visual-mode* *visual-mode*
Visual mode is a flexible and easy way to select a piece of text for an
operator. It is the only way to select a block of text.
1. Using Visual mode |visual-use|
2. Starting and stopping Visual mode |visual-start|
3. Changing the Visual area |visual-change|
4. Operating on the Visual area |visual-operators|
5. Repeating |visual-repeat|
6. Examples |visual-examples|
7. Select mode |Select-mode|
{Vi has no Visual mode, the name "visual" is used for Normal mode, to
distinguish it from Ex mode}
1. Using Visual mode *visual-use*
Using Visual mode consists of three parts:
1. Mark the start of the text with "v", "V" or CTRL-V.
The character under the cursor will be used as the start.
2. Move to the end of the text.
The text from the start of the Visual mode up to and including the
character under the cursor is highlighted.
3. Hit an operator.
The highlighted characters will be operated upon.
The 'highlight' option can be used to set the display mode to use for
highlighting in Visual mode.
The highlighted text includes the character under the cursor. On terminals
where it is possible to make the cursor invisible the cursor position is
also highlighted. On terminals where this is not possible the cursor is
displayed normally. If your cursor cannot be made invisible and you want Vim
to highlight the character under the cursor anyway, you could set the 't_cv'
and 't_ci' options to something harmless, for example:
:set t_cv=^[^[ t_ci=^[^[
With "v" the text before the start position and after the end position will
not be highlighted. However, All uppercase and non-alpha operators, except
"~", will work on whole lines anyway. See the list of operators below.
*visual-block*
With CTRL-V (blockwise Visual mode) the highlighted text will be a rectangle
between start position and the cursor. However, some operators work on whole
lines anyway (see the list below). The change and substitute operators will
delete the highlighted text and then start insertion at the top left
position.
2. Starting and stopping Visual mode *visual-start*
*v* *characterwise-visual*
v start Visual mode per character.
*V* *linewise-visual*
V start Visual mode linewise.
*CTRL-V* *blockwise-visual*
CTRL-V start Visual mode blockwise.
If you use <Esc>, click the left mouse button or use any command that
does a jump to another buffer while in Visual mode, the highlighting stops
and no text is affected. Also when you hit "v" in characterwise Visual mode,
"CTRL-V" in blockwise Visual mode or "V" in linewise Visual mode. If you hit
CTRL-Z the highlighting stops and the editor is suspended or a new shell is
started |CTRL-Z|.
new mode after typing: *v_v* *v_CTRL-V* *v_V*
old mode "v" "CTRL-V" "V"
Normal Visual blockwise Visual linewise Visual
Visual Normal blockwise Visual linewise Visual
blockwise Visual Visual Normal linewise Visual
linewise Visual Visual blockwise Visual Normal
*gv* *v_gv*
gv Start Visual mode with the same area as the previous
area and the same mode. In Visual mode the current and
the previous Visual area are exchanged.
*<LeftMouse>*
<LeftMouse> Set the current cursor position. If Visual mode is
active it is stopped. Only when 'mouse' option is
contains 'n' or 'a'. If the position is within 'so'
lines from the last line on the screen the text is
scrolled up. If the position is within 'so' lines from
the first line on the screen the text is scrolled
down.
*<RightMouse>*
<RightMouse> Start Visual mode if it is not active. The text from
the cursor position to the position of the click is
highlighted. If Visual mode was already active move
the start or end of the highlighted text, which ever
is closest, to the position of the click. Only when
'mouse' option contains 'n' or 'a'.
Note: when 'mousemodel' is set to "popup",
<S-LeftMouse> has to be used instead of <RightMouse>.
*<LeftRelease>*
<LeftRelease> This works like a <LeftMouse>, if it is not a
the same position as <LeftMouse>. In an xterm you
won't see the selected area until the button is
released. Only when 'mouse' option contains 'n' or
'a'.
If Visual mode is not active and the "v", "V" or CTRL-V is preceded with a
count, the size of the previously highlighted area is used for a start. You
can then move the end of the highlighted area and give an operator. The type
of the old area is used (character, line or blockwise).
- Linewise Visual mode: The number of lines is multiplied with the count.
- Blockwise Visual mode: The number of lines and columns is multiplied with
the count.
- Normal Visual mode within one line: The number of characters is multiplied
with the count.
- Normal Visual mode with several lines: The number of lines is multiplied
with the count, in the last line the same number of characters is used as
in the last line in the previously highlighted area.
The start of the text is the Cursor position. If the "$" command was used as
one of the last commands to extend the highlighted text, the area will be
extended to the rightmost column of the longest line.
If you want to highlight exactly the same area as the last time, you can use
"gv" |gv| |v_gv|.
*v_CTRL-C*
CTRL-C In Visual mode: Stop Visual mode. When insert mode is
pending (the mode message shows
"-- (insert) VISUAL --"), it is also stopped.
3. Changing the Visual area *visual-change*
*v_o*
o Go to Other end of highlighted text: The current
cursor position becomes the start of the highlighted
text and the cursor is moved to the other end of the
highlighted text. The highlighted area remains the
same.
*v_O*
O Go to Other end of highlighted text. This is like
"o", but in Visual block mode the cursor moves to the
other corner in the same line. When the corner is at
a character that occupies more than one position on
the screen (e.g., a <Tab>), the highlighted text may
change.
*v_$*
When the "$" command is used with blockwise Visual mode, the right end of the
highlighted text will be determined by the longest highlighted line. This
stops when a motion command is used that does not move straight up or down.
For moving the end of the block many commands can be used, but you cannot
use Ex commands, commands that make changes or abandon the file. Commands
(starting with) ".pPiIaAO&", CTRL-^, "Z", CTRL-], CTRL-T, CTRL-R, CTRL-I
and CTRL-O cause a beep and Visual mode continues.
4. Operating on the Visual area *visual-operators*
The operators that can be used are:
~ switch case |v_~|
d delete |v_d|
c change |v_c|
y yank |v_y|
> shift right (1)(*) |v_>|
< shift left (1)(*) |v_<|
! filter through external command (1) |v_!|
= filter through 'equalprg' option command (1) |v_=|
gq format lines to 'textwidth' length (1) |v_gq|
The objects that can be used are:
aw a word (with white space) |v_aw|
iw inner word |v_iw|
aW a WORD (with white space) |v_aW|
iW inner WORD |v_iW|
as a sentence (with white space) |v_as|
is inner sentence |v_is|
ap a paragraph (with white space) |v_ap|
ip inner paragraph |v_ip|
ab a () block (with braces) |v_ab|
ib inner () block |v_ib|
aB a {} block (with brackets) |v_aB|
iB inner {} block |v_iB|
Additionally the following commands can be used:
: start ex command for highlighted lines (1) |v_:|
r change |v_r|
s change |v_s|
C change (2) |v_C|
S change (2) |v_S|
R change (2) |v_R|
x delete |v_x|
D delete (3) |v_D|
X delete (2) |v_X|
Y yank (2) |v_Y|
J join (1) |v_J|
U make uppercase |v_U|
u make lowercase |v_u|
^] find tag |v_CTRL-]|
(1): Always whole lines, see |:visual_example|.
(2): Whole lines when not using CTRL-V.
(3): Whole lines when not using CTRL-V, delete until the end of the line when
using CTRL-V.
(*): In a future a blockwise shift will move the block only, not whole
lines.
Note that the ":vmap" command can be used to specifically map keys in Visual
mode.
If you want to give a register name using the """ command, do this just before
typing the operator character: "v{move-around}"xd".
If you want to give a count to the command, do this just before typing the
operator character: "v{move-around}3>" (move lines 3 indents to the right).
*{move-around}*
The {move-around} is any sequence of movement commands. Note the difference
with {motion}, which is only ONE movement command.
5. Repeating *visual-repeat*
When repeating a Visual mode operator, the operator will be applied to the
same amount of text as the last time:
- Linewise Visual mode: The same number of lines.
- Blockwise Visual mode: The same number of lines and columns.
- Normal Visual mode within one line: The same number of characters.
- Normal Visual mode with several lines: The same number of lines, in the
last line the same number of characters as in the last line the last time.
The start of the text is the Cursor position. If the "$" command was used as
one of the last commands to extend the highlighted text, the repeating will
be applied up to the rightmost column of the longest line.
6. Examples *visual-examples*
*:visual_example*
Currently the ":" command works on whole lines only. When you select part of
a line, doing something like ":!date" will replace the whole line. If you
want only part of the line to be replaced you will have to make a mapping for
it. In a future release ":" may work on partial lines.
Here is an example, to replace the selected text with the output of "date":
:vmap _a <Esc>`>a<CR><Esc>`<i<CR><Esc>!!date<CR>kJJ
(In the <> notation |<>|, when typing it you should type it literally; you
need to remove the 'B' and '<' flags from 'cpoptions')
What this does is:
<Esc> stop Visual mode
`> go to the end of the Visual area
a<CR><Esc> break the line after the Visual area
`< jump to the start of the Visual area
i<CR><Esc> break the line before the Visual area
!!date<CR> filter the Visual text through date
kJJ Join the lines back together
*visual-search*
Here is an idea for a mapping that makes it possible to do a search for the
selected text:
:vmap X y/<C-R>"<CR>
(In the <> notation |<>|, when typing it you should type it literally; you
need to remove the 'B' and '<' flags from 'cpoptions')
Note that special characters (like '.' and '*') will cause problems.
7. Select mode *Select-mode*
Select mode looks like Visual mode, but the commands accepted are quite
different. This resembles the selection mode in Microsoft Windows.
When the 'showmode' option is set, "-- SELECT --" is shown in the last line.
Entering Select mode:
- Using the mouse to select an area, and 'selectmode' contains "mouse".
'mouse' must also contain a flag for the current mode.
- Using a non-printable movement command, with the Shift key pressed, and
'selectmode' contains "key". For example: <S-Left> and <S-End>. 'keymodel'
must also contain "startsel".
- Using "v", "V" or CTRL-V command, and 'selectmode' contains "cmd".
- Using "gh", "gH" or "g_CTRL-H" command in Normal mode.
- From Visual mode, press CTRL-G. *v_CTRL-G*
Commands in Select mode:
- Printable characters, <NL> and <CR> cause the selection to be deleted, and
Vim enters Insert mode. The typed character is inserted.
- Non-printable movement commands, with the Shift key pressed, extend the
selection. 'keymodel' must include "startsel".
- Non-printable movement commands, with the Shift key NOT pressed, stop Select
mode. 'keymodel' must include "stopsel".
- ESC stops Select mode.
- CTRL-O switches to Visual mode for the duration of one command.
- CTRL-G switches to Visual mode.
Otherwise, typed characters are handled as in Visual mode.
When using an operator in Select mode, and the selection is linewise, the
selected lines are operated upon, but like in characterwise selection. For
example, when a whole line is deleted, it can later be pasted halfway a line.
Mappings and menus in Select mode. *Select-mode-mapping*
In Select mode the mappings and menus of Visual mode are used. Before it is
executed, Vim automatically switches to Visual mode, so that the same
behaviour as in Visual mode is effective.
After the mapping or menu finishes, the selection is enabled again and Select
mode entered, unless the selected area was deleted, another buffer became
the current one or the window layout was changed.
*gV* *v_gV*
gV Avoid the automatic reselection of the Visual area
after a Select mode mapping or menu has fininished.
Put this just before the end of the mapping or menu.
At least it should be after any operations on the
selection.
*gh*
gh Start Select mode, characterwise. This is like "v",
but starts Select mode instead of Visual mode.
Mnemonic: "get highlighted".
*gH*
gH Start Select mode, linewise. This is like "V",
but starts Select mode instead of Visual mode.
Mnemonic: "get Highlighted".
*g_CTRL-H*
g CTRL-H Start Select mode, blockwise. This is like CTRL-V,
but starts Select mode instead of Visual mode.
Mnemonic: "get Highlighted".
top - back to help